Cisco 300-610 Exam Dumps Options To Pass the Exam 2023

Jonnie Karnath2023-04-02T16:03:30+00:00

Cisco 300-610 exam dumps are an excellent tool for anyone preparing for the Designing Cisco Data Center Infrastructure (DCID) exam. It covers all the topics and concepts that you need to know to pass the exam. They are designed by industry experts who have in-depth knowledge of the subject matter and can provide you with the most relevant and accurate information. Using Cisco 300-610 exam dumps will give you a realistic exam experience, as the questions are similar in format and difficulty to the actual exam questions. This will help you prepare better for the exam and reduce exam anxiety. It will also helps you identify your strengths and weaknesses and focus your study efforts accordingly.

Page 1 of 7

1. Refer to the exhibit.

The security team created a new security policy that requires certain types of traffic to be subject to deep packet inspection

The traffic types are

• internet traffic to application servers

• internet traffic to corporate users

• partner network traffic to application servers

• partner network traffic to corporate users

Where must the next-generation firewalls be inserted to implement the new policy?

one-armed insertion from the core switch cluster

inline insertion between the edge router duster and the core switch duster

one-armed insertion from the ACl border leaf cluster

inline insertion between the user network switch cluster and the core cluster

2. A network consultant evaluates the Cisco UCS Fabric Interconnect SAN configuration, which must meet these requirements:

✑ All traffic must pass over the upstream device for switching and domain IDs must be preserved in the fabric.

✑ Each server should be pinned to one designated upstream interface and for the traffic to pass through the pinned port.

Which Fabric Interconnect SAN operational mode meets these requirements?

end host

switch

NPIV

Fibre Channel

3. A cloud provider deploys an infrastructure based on Cisco ACI Fabric, Cisco UCS, and Cisco HyperFlex Data Platform. The storage area network will be based on Cisco MDS 9000 Series Switches with Hyper-V, VMware, and KVM used as the virtualization platform. The requirement is to deploy the overall solution by using a robust automation and orchestration tool.

Which tool meets these requirements?

Cisco Prime Infrastructure

Cisco Network Assurance

Cisco UCS Director

Cisco Cloud Center

4. An engineer deploys VMware ESXi hypervisor on blade servers. The virtual networking is managed by Cisco Nexus 1000V Series Switches.

Which configuration aligns with Cisco recommended practices for providing high availability and a maximum throughput to the VMware ESXi hosts?

dual vNICs with static EtherChannel link aggregation

dual vNICs with hardware fabric failover on the fabric interconnects

dual vNICs with MAC pinning link aggregation

dual vNICs with LACP link aggregation

5. A network engineer must perform a VMM integration for the VMWare vCenter platform with the Cisco ACI Fabric. The vCenter is already installed in one of the rack servers connected to ACI leaf switches in a vPC mode.

Which type of management network must be used to integrate vCenter with ACI?

ARC infra

VLAN infra

out-of-band management

In-band management

6. An engineer is designing a Cisco 7000 Series disaster recovery site using the data center interconnect solution to provide gateway redundancy and needs to ensure that devices use gateways in their own data centers.

Which design approach should be used to accomplish this goal?

FHRP localized to its own data center

STP localized to Its own data center

CFS localized to Its own data center

vPC localized to Its own data center

7. A company must integrate an iSCSI storage solution into its existing production environment. The new iSCSI network must be accessible from a limited set of network segments. The client devices follow a strict network security policy to access critical data from the storage array.

Which design steps must be used to meet these requirements?

Option A

Option B

Option C

Option D

8. A Cisco UCS chassis with several blade servers, a pair of IOMs, and a pair of Cisco UCS Fabric Interconnects are installed in a data center.

Which two high-availability architectures are recommended between the IOMs and fabric interconnects? (Choose two.)

A. One, two, four and eight links are supported to be used between each IOM and fabric interconnect.

B. IOM is connected to the fabric interconnect that is acting as fabric

A. and IOM B is connected to the fabric interconnect that is acting as fabric B.

C. Any combination of one to eight links are supported to be used between each IOM and fabric interconnect.

D. The lOMs are connected with multiple straight and cross-connect links toward a pair of nonclustered fabric interconnects.

E. Straight and cross-connect links should be used between the lOMs and fabric interconnects to offer higher availability.

9. A cloud service provider provisioned four active/active data centers in various locations within the country at 50 miles between each data center. The data centers must provide redundant network infrastructure and always be available to customers.

Which two data center design steps must be used to meet these requirements? (Choose two.)

Provide application hosting services to customers from the closest data center.

Implement active cluster in data centers 1 and 2 and backup in 3 and 4.

Use asynchronous replication between data centers 1 and 2.

Deploy database services in data center 1 and application layer to other data centers.

Configure application data replication to all backup data centers.

10. A network engineer is designing a Cisco Hyperflex infrastructure. The Infrastructure will be connected to an external SAN fiber channel array and must support Microsoft clustering.

Which storage connectivity method must be used to meet these requirements?

Internet Small Computer Systems Interface

Fibre Channel over Ethernet

raw device mapping

server message block

Page 2 of 7

11. An engineer must design a DNS service available to multiple network zones as a shared service. The network zones are deployed as VRFs within the data center network and no firewall is available for communication between VRFs.

Which protocol is needed to implement the shared services?

BGP

OSPF

ISIS

VXLAN

12. Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?

NPIV mode

FC end-host mode

NPV mode

FC switching mode

13. The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches.

How is out-of-band management access provided for each VDC?

All the VDC have the same out-of-band IP address.

Each VDC has a dedicated out-of-band Ethernet management port.

Each VDC has a unique out-of-band IP address from the same IP subnet.

Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.

14. A network consultant evaluates the Ethernet Adapter Policy configuration to be applied to the Cisco UCS blade servers. The policy must minimize latency and increase throughput for sensitive applications. The solution must increase the CPU data cache hit rate to meet these requirements.

Which policy is required?

AIC

ARFS

NVM-e

RDMA

15. An engineer Installs a B-Series server in a Cisco UCS chassis that contains a pair of UCS-IOM-2208XP I/O modules. The full bandwidth of the I/O module must be utilized.

Which two elements should be used in this environment? (Choose two.)

eight twinax cables from each I/O module to each fabric interconnect

four twinax cables from each I/O module to each fabric Interconnect

Cisco UCS VIC 1225

Cisco UCS M81KR

Cisco UCS VIC 1280

16. Which two configurations are available by using a service profile template in Cisco UCS Manager? (Choose two.)

number of vHBAs

ARP entries

UUID assignment

VXLAN membership

target server

17. What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)

It operates at the resource-facing services layer and provides overall lifecycle management at the network service level.

It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer.

It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer.

It provides a standards-based northbound interface for transparent integration with systems that operate at the customer-facing services layer.

It operates at the customer-facing services layer and provides the management interface for the virtual network devices.

18. An engineer is expanding an existing ISCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used {prefix}. 2019-01.com.acme.123:00. ftd0cb21.bcb389458389

Which addressing scheme was used in the environment?

Extended Unique identifier

Fibre Channel ID

ISCSI Qualified Name

Network Address Authority

19. A customer attaches an additional storage appliance to an existing Cisco UCS domain, which contains 50 virtualization hosts that require fabric failover connectivity on fabric interconnect B. The interfaces are bound to a separate pin group to segregate traffic with a CoS value of 0

Which Cisco UCS Manager feature meets these requirements?

vNIC Template

storage policy

SAN connectivity policy

vHBA Templates

20. Refer to the exhibit.

Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch.

The requirements are to redesign the storage network and keep these considerations in mind:

✑ The traffic from each of the server must be redundant and isolated.

✑ The design must tolerate hardware and software failures and upgrades of SAN fabric devices.

Which action must be taken to meet these requirements?

Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.

Create a SAN port channel that faces the storage device to sustain a link failure.

Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.

Place an additional Fibre Channel switch to create two physically independent storage fabrics.

Page 3 of 7

21. DRAG DROP

Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.

22. Refer to the exhibit.

Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?

Secondary

Initial

Updating

Primary

23. An engineer develops a framework for automatic repetitive tasks needed to manage a Cisco Nexus 9000 Series Switch. The engineer plans to use a programmatic interface and must keep these considerations in mind.

• The customer’s environment requires the script to authenticate before executing further actions.

• The customer’s security requirements mandate the use of HTTP transport.

• The automation team is familiar with parsing messages encoded in XML or JSON format.

Which solution meets these requirements?

SNMPv3

gRPC

RESTCONF

NX-API

24. A Cisco engineer is configuring MPLS VPN BGP at a customer site that is connected to the provider site by more than one path MPLS VPN BGP Local Convergence link protection is enabled. After the engineer installs the main forwarding path and the redundant backup path within the BGP, they assign a unique route distinguisher to each VRF table on all PE devices that serve as a backup to the link.

What is a prerequisite for this local convergence to work?

Interautonomous system option A (back-to-back VRF) is active.

BGP must support lossless switchover between operational paths

IP/GRE is enabled.

The system is performing a PE-CE link protection on both ends

25. An engineer must build a VXLAN flood-and-learned network. The customer requires the

solution to be based on the IETF documented practice in RFC 7348. The solution must use broadcast, unknown unicast, and multicast (BUM) and include the efficient BUM and short BUM replication modes that use only shared trees.

Which technology meets these requirements?

MVPN

Bidirectional PIM

PIM SSM

PIM sparse mode

26. A customer deploys 32 virtualization hosts in a Cisco UCS domain. All hosts run in the same cluster and have Identical hardware specifications. The operating system requires that all firmware is consistent across the hosts (or driver support. The customer must provision additional interfaces later for expandability.

Which feature of Cisco UCS Manager meets these requirements?

Initial Service Profile Template

Initial vNIC Template

Updating Service Profile Template

Updating vNIC Template

27. Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?

BFD

UDLD

MCP

LLDP

28. An engineer working for a private telecommunication company with an employee ID 4419 90 979 is installing a pair of Nexus 7000 Series Switches and must deploy the solution with these requirements

• The environment must be separated for test and production purposes

• The separation should include control, data and management plane with fault domain isolation and improved security

• The test environment needs only F2 series line cards and a maximum of 256 VLANs

Which set of actions meets these requirements?

Use VRF faQUMIife environments Configure allow feature set for both VRFs Enable limit-resource vlan minimum for the test VRF

Use VDC for each of the environments Configure limit-resource module-type functionality for the test VDC Enable limit resource vlan for the test VD

Use VDC for each of the environments Configure allow feature set for both VRFs Enable limit-resource vlan maximum for the test VRF

Use VRF for each of the environments Configure limit-resource module-type functionality for the test VD

Enable module-type for the VRF

29. A network engineer must select a high availability feature for their data center.

The solution must ensure network resilience, reduce network instability for Layer 3 routing protocols, and meet these requirements:

✑ The device must notify its neighbors when the control plane is undergoing a restart.

✑ The solution must suppress routing flaps in case of stateful switchovers.

Which solution must be implemented?

BFD

HSRP

NSF

ISSU

30. The end users report issues with datastore reachability between the newly installed virtual machines (VMs) and the storage array. The VMs are deployed on a Cisco C-Series server, directly connected with Cisco Nexus 5672UP switches over FCoE VLAN. The data traffic on VLAN 99, which is designated as a native VLAN, reaches its default gateway, but FCoE VLAN 99 fails to access the datastore.

Which action resolves the problem?

Implement FCoE traffic on VLAN 10 and data traffic on VLAN 99.

Implement host-facing FCoE ports as spanning-tree port type edge.

Configure the FCoE VLAN in the VSAN database before including it in the trunk port.

Configure the FCoE VLAN traffic on a separate interface from any other VLANs that traverse the network.

Page 4 of 7

31. An engineer must choose the World Wide Port Name for the Cisco UCS Fibre Channel virtual host bus adapter.

Which identifier must be used?

naa.600a09840691712159764d

fe80::314e:4566:8702:bf3d

iqn.2021-08.com.acme:3xxx

20:00:00:25:B5:97:c3:ac

32. An engineer working for a private telecommunication company with an employee id 4298 53 420 must evaluate connectivity to the new data centre location based on Cisco Nexus 7000 Series Switches. The IP connectivity is already supplied by the service provider. The solution must provide a Layer 2 extension and optimize the traffic localization.

Which technology supports these requirements?

IS-lS multi site over ACl

VXLAN over EoMPLS

OTV over IP and multicast

BGP over VPLS

33. A customer requires a tool to manage Cisco network hardware. The solution must use secure communication using a secure network protocol, support the use of declarative language to manage the state of resources, and periodically pull changes to the controlled nodes.

Which tool meets these requirements?

Ansible

SaltStack

Puppet

Nomir

34. What are two advantages of using Cisco vPC as compared to traditional access layer designs? (Choose two.)

supports Layer 3 port channels

disables spanning-tree

no spanning-tree blocked ports

uses all available uplink bandwidth

maintains single control plane

35. A network administrator must create a redundant vHBA for the mission-critical virtual machines (VMs) installed on a Cisco UCS Fabric Interconnect blade server. The VMs access multiple datastores using VSAN55 and VSAN95. The datastore on which the VMs are hosted must be accessible if any of the uplinks goes offline.

Which action meets these requirements?

Attach VSAN55 to vHBA1 and VSAN95 to vHBA2.

Assign VSAN55 and VSAN95 to vHBA1 and vHBA2.

Enable failover for the vHBA with VSAN55 and VSAN95 enabled.

Configure load-balancing for vHBAs with VSAN55 and VSAN95 attached.

36. An engineer manages a multi-organization Cisco UCS fabric and requires a solution to streamline the daily operational tasks of creating service profile templates. The operations team is unfamiliar with programming languages and must have a solution that is written in an easy-to-read and declarative manner. The operations team also requires the tool to be flexible enough to support the creation of custom modules. The development team is familiar with the Python programming language and can develop these custom modules for the operations team.

Which tool meets these requirements?

Ansible

Puppet

CFEngine

Chef

37. An engineer is designing a data center that uses FCIP.

How is QoS configured in this environment?

A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.

A separate DSCP value must be configured for all FCIP VSAN traffic.

A separate DSCP value and priority queuing must be configured for all FCIP traffic.

Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.

38. DRAG DROP

Drag and drop the technologies from the left onto the correct descriptions on the right.

39. Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus 7700 Series Switches?

NX-API

Postman

Bash shell

Guest shell

40. DRAG DROP

Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.

Page 5 of 7

41. A network engineer must create a Fibre Channel fabric QoS design for an existing data center. The solution must provide relative bandwidth guarantees to application traffic, control latency, and prioritize application traffic.

Which mechanism must be deployed to support these requirements?

traffic policing

traffic shaping

traffic remarking

traffic classification

42. An engineer must develop a Python tool to automate software upgrades of both data center and non-data center devices. All devices offer a RESTful API and require a JSON or XML payload Vendor-specific libraries must be avoided.

Which library must the engineer choose?

requests

Nornir

ncciient

Netmiko

43. DRAG DROP

Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.

44. A customer needs to deploy a three-tier network architecture that will consist of web, and other business-critical applications. The solution will include Cisco UCS 6324 Fabric interconnects managing B and C Series servers The Fabric interconnects will be connected to the cisco nexus 7706 series switch for network access. A storage array will be directly connected to the UCS deployment.

Which type must be used to meet these requirements?

UCS Interconnect in Ethernet end-host mode UCS Interconnect in Fibre Channel switching mode Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode

UCS Interconnect in Ethernet switching mode UCS interconnect to Fibre Channel switching mode Fabric Interconnect uplinked to the Nexus device using an LACP port-channel in passive mode

UCS Interconnect in Ethernet end-host mode UCS Interconnect in Fibre Channel end-host mode Fabric Interconnect uplinked to me Nexus device using an LACP port-channel in passive mode

UCS Inter conned in Ethernet switching mode UCS interconnect in Fibre Channel end-host mode Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode

45. Refer to the exhibit.

The data center DC1 uses VXLAN technology The company asked a service provider to design another data center called DC2 and stretch EVPN information between the data centers based on the same technology

The fabric requires

• endpoint information propagated end-to-end across both data centers

• misconfiguration replicated from DC1 to DC2

Which actions must the design include in DC2 to meet these criteria?

• Set BGP AS to 65500 • Configure RIP as an underlay IGP

• Set BGP AS to 65501 • Configure EIGRP as an underlay IGP

• Set BGP AS to 65501 • Configure RIP as an underlay IGP

• Set BGP AS to 65500 • Configure IGRP as an underlay IGP

46. Refer to the exhibit.

A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel.

What is the result of this policy?

Cisco UCS Manager creates two separate fabric port channels.

Cisco UCS Manager creates a single fabric port channel.

The port channel is disabled until an administrator enables it manually.

Each uplink that connects an IOM is configured as a discrete link.

47. An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network.

Which two solution must be used to meet these requirements? (Choose two)

spanning tree protocol

VRF-lite

Distributed anycast gateway

DC interconnect

Inter-site network

48. A company has several data centers with hundreds of Cisco UCS blade chassis. A network consultant plans to active Cisco Discovery Protocol to the servers to facilitate Layer 1 troubleshooting. For security reasons, the company wants to restrict the servers from sending different MAC addresses to the fabric interconnect after the MAC address from the first packet is learned.

Which two policies be modified to support this design? (Choose two.)

Pin Group Policy

Network Control Policy

vNIC Policy

vNIC Template Policy

Ethernet Adapter

49. An engineer is experiencing performance issues on a cisco UCS blade server. The B-series blade server contains four CPUs, most of which are idle. The engineer notices that the CPU is suffering from too many requests sent by the NIC. Additionally, the number of queues appears to be insufficient and only a single CPU is processing the network traffic.

Which policy must be used to alleviate these issues?

Ethernet adapter

vNIC placement

LAN connectivity

Dynamic vNIC connection

50. Which two methods mitigate congestion in a SAN network? (Choose two.)

Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.

Use the port-monitor command to detect slow drain devices.

Configure the port channel to enable individual buffer-to-buffer credits.

Configure the port monitor to allow categorization of a specific device as slow.

Configure the flow control for the FC to use R_RD

Page 6 of 7

51. Which address pool is used when a vHBA template is created?

MAC

WWPN

UUID

52. Refer to the exhibit.

An engineer is configuring a QoS policy with these requirements

✑ Match-all AF11 traffic and set it to a DSCP value of 14.

✑ The committed rate must be 10 Mbps with a committed burst rate of 1000 ms

✑ Drop any AF11 traffic that violates these settings.

✑ Any traffic other than af11 must have a DSCP value of 0

The given class-map configuration already exists.

Which solution must the engineer use to meet the requirements?

A)

Option A

Option B

Option C

Option D

53. Refer to the exhibit.

The Cisco Nexus Series Switch with hostname Nexus! is the default gateway for server A and server B Both servers must have reachability to the internet; however, server A internet traffic must pass through the firewall for deep packet inspection. Also, the firewall must inspect any communication between server A and server B.

Which solution must be applied to separate the data plane path for server A and server B?

VLAN

VRF

VDC

VXLAN

54. A data center uses Cisco Nexus 7000 Series Switch and contains two tenants, tenant A and tenant B.

✑ Tenant A uses IP addresses in the 10.2.30.41/24 to 10.2.30.64/24 range.

✑ Tenant B uses IP addresses in the 10.2.30.120/24 to 10.2.30.192/24 range.

The engineer must implement a solution that

✑ Isolates the traffic for each tenant as separate routing data and control planes.

✑ Physically partitions the Cisco Nexus device into separate multiple logical devices with separate management, failure domain isolation, and resource management.

Which two technologies meet these requirements? (Choose two.)

VDC

vPC

VXLAN

VLAN

VRF

55. A customer needs a design for a new data center network that meets these requirements:

✑ Logically partition the environment into separate security domains.

✑ Cut costs related to purchasing additional equipment.

✑ Separate routing processes, TCAM, QoS tables, and data planes.

Which technology must be used?

VLAN

vPC

VDC

VRF

56. A network engineer must design a Cisco HyperFlex solution based on these requirements:

• two clusters in the main data center consisting of five HyperFlex nodes

• one edge node tor the remote branch

• cluster nodes that use one rack unit of space

Which two devices should be used in the remote branch cluster for this design? (Choose two.)

HX240c

Fabric Interconnect 6300

HX220c

Gigabit Ethernet Switch

UCS B200

57. Refer to the exhibit.

A cloud provider service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a layer 2 topology to communicate with each other.

Which Cisco ACI topology design meets these requirements?

Multi-site

Multi-pod over MP-BGP EVPN

Multi-cloud

Multi-pod over OSPF EVPN

58. The user traffic destined to all web servers located in the data center must pass first through a set of firewalls for deep packet inspection.

A network architect must design the Cisco Intelligent Traffic Director (ITD) deployment that meets these requirements:

✑ The firewalls are connected to a set of two Cisco Nexus switches to provide stateful handling of traffic.

✑ The ITD service is provided for inside and outside segments of the firewall.

Which ITD deployment mode must be implemented to meet these requirements?

server load-balancing deployment mode

server vPC deployment mode

one-arm deployment mode

sandwich deployment mode

59. DRAG DROP

A failure occurs on the network between two BFD and OSPF neighbors.

Drag and drop the protocol actions from the left into the correct order on the right.

60. An engineer enables the HSRP feature on a Cisco Nexus 7000 Series Switch. It must be ensured that the switch manages packets that are sent to the local vPC MAC address, remote vPC MAC address, and HSRP virtual MAC address.

Which command accomplishes this goal?

peer-switch

peer-gateway

map-server

hsrp preempt

Page 7 of 7

61. An engineer needs an orchestration and monitoring tool that should be used for managing the storage networks and VXLAN fabrics. The tool should also allow support built-in dashboard and real-time health summary for managed devices.

Which tool meets these requirements?

Cisco Intersight

Ansible

Puppet

Cisco DCNM

Facebook Twitter LinkedIn Google + Email

Cisco 300-610 Exam Dumps Options To Pass the Exam 2023

Cisco 300-610 Exam Dumps Options To Pass the Exam 2023

Author

LEAVE A COMMENT Cancel reply

Related Posts