NetApp NCDA NS0-162 Exam Dumps [Updated 2023]

Jonnie Karnath2023-06-26T07:09:10+00:00

Are you preparing for the NetApp Certified Data Administrator (NCDA) NS0-162 exam? The NS0-162 exam is designed to test your knowledge and skills in managing and troubleshooting NetApp data storage systems. Passing this exam will certify you as a NetApp Certified Data Administrator. At Certspots, we understand the importance of passing the NS0-162 exam and obtaining the NCDA certification. That’s why we offer the latest and most accurate NetApp NCDA NS0-162 Exam Dumps, updated for 2023. Our NetApp NCDA NS0-162 exam dumps are designed to simulate the actual NS0-162 exam, ensuring you are fully prepared to pass the exam on your first attempt. With Certspots, you can be confident in your knowledge and skills, and stand out as a qualified NetApp professional.

Don’t wait any longer to start your NCDA certification journey. Contact Certspots today for the best NS0-162 exam dumps on the market.

Page 1 of 12

1. Exhibit:

Referring to the exhibit, you have a FlexGroup volume that is 250 TB with 10 constituents. You apply the volume modify Cvserver fg1_vs Cvolume fg1 Csize 350TB command.

What affect does the command have on the FlexGroup volume and its constituents?

It grows the FlexGroup volume to 600 TB by adding 14 new constituents.

It grows the FlexGroup volume to 350 TB by adding four new constituent

It grows the FlexGroup volume to 350 TB by increasing the size of each constituent to 35 T

It grows the FlexGroup volume to 600 TB by increasing the size of each constituent to 60 T

2. In an HA pair, how many Intercluster LIFs are required for FabricPool?

3. Exhibit:

A storage administrator has an existing FAS2554 HA pair. They want to add a new FAS2620 HA pair to the cluster. The SAN protocols are licensed.

Referring to the exhibit, after adding the second HA pair, how many more nodes are available to add for future use?

4. Exhibit:

You use DNS zone delegation to access an SVM that is set up for on-box DNS to nfs1.netapp.com. You can ping both lif1 and lif2 by IP address, but you can only ping lif1 by the delegated DNS name nfs1.netapp.com.

Referring to the exhibit, what must you do to allow on-box DNS access to lif2?

Configure lif2 in the external DN

Configure the name service to allow DN

Modify the DNS zone on lif2 to nfs1.netapp.com.

Modify the firewall policy on lif2 to management.

5. What are two security types available for NFSv3 shares? (Choose two.)

AUTH_SYS

unified

Kerberos vs

mixed

6. A node fails on an HA configuration. A successful failover occurs, but your clients that are using the SMB protocol complain that they are not able to access their data.

In this scenario, what caused the problem?

The surviving node is not licensed for CIF

One of the cluster Interconnect ports on the surviving node failed.

The quota for the qtree has been reached.

The disk ownership did not transfer correctly.

7. After deploying an AFF A400, you want to deploy a storage virtual machine (SVM) to serve SMB data.

Which three conditions must exist in this scenario? (Choose three.)

You must have sufficient space for the root volume.

You must have a non-root aggregate in the online state.

You must have encryption enabled on the root volume.

You must synchronize the cluster time.

You must have configured the export policies.

8. Your company requires that all data must be encrypted in flight to prevent data from falling into the wrong hands.

What are two ways to accomplish this task? (Choose two.)

Ensure that SnapMirror compression is enabled in all SnapMirror relationships.

Modify your cluster peering relationships to support cluster peering encryption.

Enable Multi-Factor Authentication (MFA) for your SnapMirror relationships.

Ensure that all intercluster replication traffic is done through a VPN tunnel.

9. Click the Exhibit button.

Assuming that the export policy on the storage allows access, you want to enable client access to the finance volume in the departments SVM in the /tmp/fin directory.

Referring to the exhibit, which UNIX command must be executed to accomplish this task?

mount Ct nfs Co nfsvers=3 cluster01:/finance /tmp/fin

mount Ct nfs Co nfsvers=3 cluster01:/fin /tmp/fin

mount Ct nfs Co nfsvers=3 cluster01:/dept/fin /tmp/fin

mount Ct nfs Co nfsvers=3 cluster01:/departments/finance /tmp/fin

10. According to NetApp best practices, when you configure FC, how many data LIFs should you create per node?

Page 2 of 12

11. What are three advantages of configuring network subnets? (Choose three.)

The DNS zone is automatically set on the NAS LI

The IP address is automatically set on the NAS LI

The flow control is automatically set on the port.

The default gateway is automatically added to the SV

The subnet mask is automatically set on the NAS LI

12. As an administrator, you are asked to enable deduplication on volumes that are separated by workloads on a FAS8200 system.

On which volume would you see the highest savings from enabling deduplication?

home directory shares

virtual desktop environment

file share

SQL database

13. Exhibit.

Miss-----------------

The availability of the remote cluster in the peering relationship shows "Partial."

Referring to the exhibit, what is the reason for this status message?

The remote cluster does not have its cluster license applied properly.

The local cluster is unable to authenticate successfully to the remote cluster.

Some nodes In the local cluster are not able to contact some or all nodes in the remote cluster.

The Intercluster LIFs on the local cluster are unavailable and not able to communicate to the remote cluster.

14. Which two statements are true about epsilon? (Choose two.)

Epsilon is automatically assigned to the last node when the cluster is created.

Epsilon is an extra fractional vote that enables quorum.

In a two-node cluster, each node holds epsilon.

Epsilon is automatically assigned to the first node when the cluster is created.

15. You are configuring an ONTAP cluster to use NVMe/FC.

In this scenario, which two statements are true? (Choose two.)

Create NVMe LIFs on FC target ports.

Create an SVM with both NVMe and FC protocols enabled.

Create an SVM with NVMe enabled.

Create and start the FC service.

16. You want to scale out storage performance for read-Intensive data across multiple locations.

In this scenario, which NetApp feature accomplishes this task?

FlexClone

FlexVol

FlexCache

Flash Pool

17. On an All Flash FAS, where is the root parity information located on a node using Advanced Disk Partitioning?

distributed among SSD partitions

on a single SSD partition

on two SSD drives, regardless of RAID type

on a single SSD drive, regardless of RAID type

18. Which configuration Is supported using NetApp's All SAN Array (ASA)?

24-node cluster

single node cluster

2-node cluster

12-node cluster

19. Exhibit.

You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit.

In this scenario, which two protocols are supported? (Choose two.)

SMB

NVMe

ISCSI

NFS

20. A storage administrator moves a LUN from one volume to another.

In this scenario, what is left behind in the volume?

LUN geometry settings

all of the deduplicated blocks from the base LUN

Snapshot copies of the volume

clones of the LUN

Page 3 of 12

21. Exhibit:

You configured LACP between a 2-node AFF 220 system and two Ethernet switches using multichassis Ether-channel for redundancy. You sent the network connection diagram in the exhibit to your network team to cable and configure the switch. You noticed partial connectivity on the AFF A220 for the interface groups.

Referring to the exhibit, which two statements are correct? (Choose two.)

ONTAP does not have a multichassis Ether-channel feature.

The network team forgot to verify the port channel members.

10 GbE ports are not supported with the AFF A220.

The storage cabling to the switches is incorrect.

22. An administrator is configuring a third-party software for NDMP. The application is targeting the IP of the data LIF of the SVM called "SVM1. "NDMP is configured as the SVM scope.

The NDMP service is not enabled for the admin SVM. SVM1 has a user called "Tom" with the backup role. Tom can connect by using SSH to the controller with the credentials that he used to configure the third-party software. The authentication of the third-party software is falling.

In this scenario, what is the reason for the authentication failure?

The NDMP password has not been generated for Tom.

The application is not targeting the IP of the cluster or node management LI

The user Tom does not belong to the admin SV

The NDMP service is not enabled for the admin SV

23. You want to use SVM disaster recovery to replicate an SVM to your disaster recovery site.

You have the requirements shown below.

- The source and destination clusters are in different network subnets.

- The source SVM is running only NAS protocols.

- The CIFS server configuration should be replicated.

Which two configurations are correct in this scenario? (Choose two.)

The SnapMirror -identity-preserve parameter should be set to true.

The SnapMirror -discard-configs network policy parameter should be used.

The SnapMirror -discard-configs network policy parameter should not be used.

The SnapMirror -identity-preserve parameter should be set to false.

24. When you create an SVM in ONTAP, what is the privileged account that is created to manage the SVM?

administrator

root

admin

vsadmin

25. Exhibit

You have Installed a new ONTAP 9.8 cluster and want to move the e0e and e0c ports into a new broadcast domain. Referring to the exhibit, which action satisfies this requirement?

Use the irrDadcast-domain create command

Use the broadcast-domain split command.

Use ONTAP System Manager to create a new broadcast domain.

Use the broadcast-domain= merge command.

26. You need a Flash Pool aggregate on both nodes of a 2-node cluster. You also want to maximize usable space in the SSD cache.

Which Flash Pool configuration is appropriate for this situation?

Create an SSD storage pool, and then create a Flash Pool aggregate on each node.

Create two storage pools and then create a Flash Pool aggregate on one node; then create another Flash Pool aggregate on the partner node to use the second storage pool.

Create a Flash Pool aggregate with physical SSDs on each node.

Create a Flash Pool aggregate on one node using an SSD storage pool; then create another Flash Pool aggregate using physical SSDs on the partner node.

27. Exhibit:

A customer has zoned switches to a host, but the host cannot see the LUNs. Referring to the exhibit, what needs to be done to make the LUNs visible to the host? (Choose the best answer.)

Zoning should be changed to use the 20:06:d0:39:ea:05:03:a3 and 20:08:d0:39:ea:05:03:a3 WWPNs.

Ports on time-a700 nodes 1 and 2 should have the fc_nvme protocol removed.

Zoning should be changed to use the 50:0a:09:81:80:d2:c3:b8 and 50:0a:09:81:42:c2:b9 WWPNs.

The customer should remove the switches and directly connect the host to the controller ports.

28. Windows 2019 reports 500 GB of free space on a disk; however, on the storage side, the LUN has 0 bytes free. When the host deletes files on the disk, auto reclaim on the thin-provisioned LUN does not occur.

In this scenario, which action should you take to enable space reclamation?

Set the space allocation option to disable.

Set the space allocation option to enable.

Enable space guarantees on the volume.

Enable space guarantees on the LU

29. You created a new SVM with two NFS data volumes. You have a Linux host on the same subnet as the SVM that is able to NFS mount, however a Linux host on a different subnet is not able to NFS mount.

You confirmed that the export policy rules are correct.

In this scenario, which configuration will solve the mount failure? (Choose the best answer.)

The NFS server is not configured on the SV

NTP is not configured on the SV

NFS auditing is not enabled on the SV

The SVM default network route is missing.

30. You want to enable jumbo frames on a NetApp storage system.

Which network object would you modify to accomplish this task?

broadcast domain

port

LIF

VLAN

Page 4 of 12

31. Your customer has an NTFS volume that they want to access over both SMB and NFS. The client explains that SMB access works fine, but the clients are unable to NFS mount the volume.

What are three reasons that would cause this issue? (Choose three.)

There is no export-policy rule for the NFS clients.

The NSF server is not configured.

Multi-protocol is not licensed on the cluster.

The volume security style must be changed to UNI

The LIF data protocol does not allow NF

32. You are using NetApp Volume Encryption (NVE) on an AFF system.

In this scenario, which two key-management solutions are supported for NVE? (Choose two.)

an SSH key manager

an XTS-AES-256 key manager

the onboard key management service

a KMIP server

33. What is the purpose of Epsilon?

to monitor cluster health

to be used as a load-balancer for a 2-node cluster

to evaluate the differences in node configurations

to be used as a tie-breaker for a cluster quorum

34. You want to create a FlexGroup volume that contains four aggregates with eight constituents each.

In this scenario, what is the value of the aggregate list multiplier?

35. Click the Exhibit button.

You are configuring a NetApp cluster to communicate on VLAN 1. However, the new LIF is unable to communicate with any host in the VLAN.

The network administrator has configured the switch port as an access (untagged) port on VLAN 1 and says that the VLAN is non-routed.

Referring to the exhibit, what would you do to troubleshoot this problem? (Choose the best answer.)

Verify that there is not IP address conflict on the network.

Reconfigure the LIF to be on port e0c.

Add a default gateway.

Verify that the network cabling is working properly.

36. You want to prepare your ONTAP cluster and your ESXI cluster to connect NFS datastores over a 10-GbE network using Jumbo frames.

In this scenario, which three configurations would accomplish this task? (Choose three.)

Enable jumbo frames with an MTU of 9000 for your ESXi hosts.

Enable jumbo frames with an MTU of 9216 for your switches.

Enable Jumbo frames with an MTU of 1500 for your ESXI hosts.

Enable Jumbo frames with an MTU of 1500 for your ONTAP cluster.

Enable Jumbo frames with an MTU of 9000 for your ONTAP cluster.

37. You have an 8-node cluster and need to test a ping to all cluster interconnect ports between all of the eight nodes in one command.

Which advanced command would accomplish this task?

cluster ping-cluster

network ping6

cluster peer ping

network ping

38. An administrator has an existing host that is using FCP for access to LUNs on a NetApp SVM. The administrator replaces the host HBA and updates the zoning configuration on the FC switches.

After the replacement, the host loses access to all of its LUNs. The administrator verifies that the host WWPNs successfully show up in the FLOGI database on the switches.

What should the administrator do to restore LUN connectivity?

Take the LUNs offline and then bring them back online again so the host can see new paths to the LUNs.

Update the initiator group mapped to the LUN with the new WWPNs.

Migrate the data to newly provisioned LUNs that are mapped with the new WWPNs

The host needs to be rebooted so that it will refresh its view of the fabric.

39. Which two types of HA policies are applied to which types of aggregates? (Choose two.)

storage failover (SFO) policy to data aggregates only

controller failover (CFO) policy to all the aggregates

storage failover (SFO) policy to root aggregates only

controller failover (CFO) policy to root aggregates

40. Exhibit.

You have received an alert from Active IQ Unified Manager that interface eOc has gone offline. Network engineering asks for the corresponding MAC address for the port that has a problem.

Referring to the exhibit, which MAC address would you supply to the engineering team?

02:a0:98:fl:2e:be

00:a0:98:fl:2e:b2

00:a0:98:fl:2e:b3

02:a0:98:fl:21:88

Page 5 of 12

41. What are three volume-level storage efficiency features of ONTAP? (Choose three.)

deswizzle

space reclamation

compaction

compression

deduplication

42. You must expand an existing FAS8200 switchless cluster to a switched cluster and add a new FAS8200 HA pair in the cluster.

In this scenario, which three actions would you perform to expand the cluster? (Choose three.)

Ensure that the switchless-cluster network option is false.

Connect the existing nodes to the cluster switches.

Change the cluster ports for the existing HA pair.

Ensure that the switchless-cluster network option is true.

Join the new HA pair to the cluster.

43. You need to move a FlexVol volume from one SVM to another.

In this situation, which command would accomplish this task?

volume create

volume rehost

volume modify

volume move

44. What are three default settings for SAN volumes when volumes are created with System Manager on AFF solutions? (Choose three.)

Volumes are thin provisioned.

Volume space is reserved from the aggregate.

Aggregate inline deduplication is enabled.

Volume compression is enabled.

Volumes have the default snapshot schedule enabled.

45. A customer has lost access to shares being used by an application.

What are three troubleshooting steps the administrator should take? (Choose three.)

Verify that the admin SVM is running on the node being accessed by the customer.

Verify that the LIF resides on its home port.

Verify that the LIFs in the SVM are all up and active.

Verify that the SVM has CIFS running, that the share exists, and is online.

Verify that there is network connectivity between the SMB client and the SV

46. Which Data ONTAP Cluster-Mode clone technology will lock a Snapshot copy?

LUN Clone

Snapshot Clone

Volume Clone

Aggr Clone

47. Which mediator type is required for an ONTAP Select 2-node HA solution?

mediator code

mediator storage virtual machine

mediator cluster

mediator virtual machine

48. You must enable remote authentication and grant a remote administrator either cluster admin or vsadmin access.

In this scenario, which three authentication types are supported for ONTAP 9.7? (Choose three.)

SAML

CHAP

LDAP

RADIUS

49. Click the Exhibit button.

According to NetApp best practice, which ports are supported for FC as shown in the exhibit?

SAS Ports

Management Ports

HA Ports

UTA2 Potts

50. You are currently using SnapMlrror Synchronous (SM-S) to protect a critical workload at your organization and you want to convert the SnapMlrror policy from Sync to StrictSync.

In this scenario, which procedure allows you to achieve this task?

Recreate the SnapMirror relationship, specifying the strictsync policy, then re-synchronize it.

Modify the existing SnapMirror relationship specifying the strictsync policy, then re-synchronize It.

Recreate the SnapMlrror relationship, specifying the strictsync policy, then promote It.

Modify the existing SnapMirror relationship specifying the strictsync policy, then promote It.

Page 6 of 12

51. An administrator has a FAS8200 system and is adding a DS224C disk shelf for Flash Pool use, consisting of 800 GB SSDs.

When a flash pool is created out of these disks, what is the default RAID group type?

RAID-TEC

RAID-DP

RAID-4

RAID1

52. Which management tool would you use to deploy a new instance of Cloud Volumes ONTAP?

OnCommand System Manager

OnCommand Unified Manager

Cloud Volumes Service

OnCommand Cloud Manager

53. After creating an SVM In an ONTAP cluster, you are asked to delegate administration of the newly created SVM to an SVM administrator.

In this scenario, which two tasks must you complete? (Choose two.)

Create the vsadmin user account in the new SV

Create a LIF for SVM management.

Configure role-based access control (RBAC) for the vsadmin user account.

Set a password for (the vsadmin user account.

54. You have a remote FlexCache storage device that is running on ONTAP Select 9.8 software. The cache origin volume Is on an FAS8700 that is running ONTAP 9.8 software. The WAN connection dropped, and the FlexCache volume is in disconnected mode.

In this scenario, which LIFs would you ping to troubleshoot the disconnect?

management

Intercluster

data

cluster

55. Which two SVM types does a cluster contain after cluster creation? (Choose two.)

dp-destination

peer

data

admin

56. Exhibit:

https://www.nwexam.com/files/nwexam/download/NS0-160-Demo_1.png

Referring to the output shown in the exhibit, which aggregate capacity is available for a volume?

3.4 TB

3.6 TB

8TB

4TB

57. Exhibit:

You are asked to identify cache hit rates on your FAS8200 HA pair NAS volumes. You need to increase performance of your HDD cluster1_01_aggr1 aggregate.

Referring to the exhibit, which NetApp technology achieves the requirement?

FlexCache

Flash Pool

FabricPool

MAX Data

58. You must create separate SVMs that are based on teams. You also need to create separate SVMs that are based on the block-level and file-level protocols.

Your DevOps team requests NFS and CIFS protocols, your AI team requests NFS and NVMe protocols, and your marketing team requests SMB and iSCSI protocols.

In this scenario, what is the minimum number of SVMs that you must create to satisfy these requirements?

59. Which failover policy is set by default on an iSCSI LIF?

local-only

broadcast-domain-wide

disabled

sfo-partner-only

60. Which three data protocols are supported simultaneously in a single storage virtual machine (SVM)? (Choose three.)

FCP

iSCSI

HTTP

CIFS

InfiniBand

Page 7 of 12

61. You are configuring an FC to allow LUN access to a host system. In this scenario, a switch needs a zone configuration file that includes which two elements? (Choose two.)

host initiator WWPN

SVM target WWNN

host initiator WWNN

SVM target WWPN

62. A storage controller named cl1-01 has disk ownership of disks in shelves 10 and 11. Its HA partner, cl1-02, has disk ownership of disks in shelves 20 and 21. Controller cl1-01 has successfully failed over to cl1-02.

In this scenario, what are the owner and home attributes for disks in Shelf 11?

a home attribute of cl1 -01 and an owner attribute of cl1 -02

a home attribute of none and an owner attribute of cl1-02

a home attribute of cl1-02 and an owner attribute of cl1-01

a home attribute of cl1-02 and an owner attribute of cl1-02

63. The NVM Express (NVMe) flash capacity is upgradeable in which two systems? (Choose two)

FAS9000

FAS8200

FAS2650

AFF A700

64. Exhibit.

A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.

Referring to the exhibit, what is the problem?

The host IP address does not match the export policy rule.

The volume is in read-only.

The volume is not mounted In the namespace.

The logical Interface does not allow the NFSv3 protocol.

65. You execute the volume unmount -vserver vsl -volume vol1 command.

In this scenario, which statement is true?

Data within the vol1 volume is lost.

All data within the junction point is inaccessible to NAS clients.

The Snapshot policy in the volume needs to be recreated once the volume is remounted.

The existing volume export policies and SMB shares created on the volume or on directories and junction points within the unmounted volume are not retained.

66. Which two storage efficiency features are enabled by default on AFF systems? (Choose two.)

LUN-level compression

aggregate-level compression

aggregate-level inline deduplication

volume-level Inline deduplication

67. You have a 4-node cluster with a NetApp AFF A400 HA pair and a NetApp FAS8700 HA pair running NetApp ONIAP 9.8 software. You are required to set up 2-factor authentication for the ONTAP CU.

Which two authentication methods are required in this scenario? (Choose two.)

public key

Security Assertion Markup Language (SAML)

IP security (IPsec)

password

68. Exhibit:

You have a 2-node cluster in a single-fabric SAN. Host 1 and Host 2 are part of a VMware cluster and access the same LUNs that reside in your NetApp storage.

Referring to the exhibit, what would be a way to test whether the multipathing is properly configured in your environment?

Verify whether all destination storage target ports are contained in the same zone as Host 1.

Administratively set ports 0a and 0c on Controller 1 to the offline setting.

Disconnect Host 1 port and verify whether Host 2 is still able to run the VMs.

Power off the SAN switch.

69. What are two benefits of using quad-path HA cabling on an AFF A700? (Choose two.)

It improves resilience of the cluster.

It provides double the I/O bandwidth to a stack.

It improves cluster failover time.

It provides double the number of shelves that you can attach.

70. You want to configure Performance Manager to monitor the average latency of a volume hosting a Microsoft Exchange Server.

In addition, an alert needs to be created before latency reaches 20 milliseconds.

How would you accomplish this task?

Set a threshold policy for average latency with a warning of 12 and a critical warning of 15.

Set a data source for average latency with a warning of 12 and a critical warning of 15.

Set an event handler for average latency with a warning of 12 and a critical warning of 15.

Set an event inventory for average latency with a warning of 12 and a critical warning of 15.

Page 8 of 12

71. Which three name services are supported with NFS? (Choose three.)

NetBIOS

WINS

External NIS domains (NIS)

External LDAP domains (LDAP)

Local Users (file)

72. Your company requires WORM archiving of data on their ONTAP cluster. The data must not be able to be deleted even by an administrator.

Which ONTAP feature fulfills this requirement?

SnapLock Compliance

SnapMlrror software

SnapLock Enterprise

SnapVault software

73. Which three configurations does ONTAP Select support? (Choose three.)

2-node cluster hosting NAS and iSCSI

3-node cluster hosting NAS and iSCSI

single-node cluster hosting NAS and iSCSI

4-node cluster hosting NAS and iSCSI

6-node cluster hosting NAS and iSCSI

74. Which of the following statements is true about a Flash Pool?

A 32 bit or 64 bit aggregate containing SSDs and HDDs

A 32 bit aggregate containing SSDs and HDDs

A 64 bit aggregate containing SSDs and HDDs

A 64 bit aggregate containing only SSDs

75. Which two performance threshold policies in OnCommand Unified manager are configurable? (Choose two.)

user-defined

volume

system-defined

dynamic

76. Which three statements are true for mailbox disks per node in an HA pair? (Choose three.)

Six disks are required if the root volume is on a mirrored aggregate.

Two disks are required if the root volume is on a disk shelf.

Four disks are required if the root volume is on a mirrored aggregate.

Eight disks are required if the root volume is on partitioned disks.

One array LUN is required if the root volume is on a storage array.

77. You need to create a new LIF on WLAN 10. The port-channel configuration on the upstream switch has VLAN 10 set to the native (untagged) VLAN.

In this scenario, what should be set as the LIF’s home port?

a0a

a0a-10

e0c-10

e0c

78. An administrator has an SVM named SVM_NAS that is used for NFS clients. You change the volume junction path of a volume named vol1 from /vol1 to /IT/vol1. After you make this change, the existing NFS clients are unable to connect to the new path.

Which cluster object should you update to solve this problem?

the load-sharing mirror of the SVM root volume

the cluster admin LIF

the data LIF on the SVM_NAS SVM

the export policy on the SVM_NAS SVM

79. A storage administrator is not receiving performance alerts on an OnCommand Unified Manager policy that was created for a NAS volume.

Which additional task is required to solve this problem?

You should assign a tiering policy.

You should assign the performance threshold policy.

You should clear the performance threshold policy.

You should search for volume data.

80. A newly created FC LUN is not visible to a Windows 2016 server containing other LUNs in the cluster that are working properly.

In this scenario, what must be verified in the solution?

The FC protocol is licensed on the cluster.

An igroup mapping exists to the LU

NPIV is enabled on the switch.

The WWPN is in the Brocade/Cisco zone configuration.

Page 9 of 12

81. You created a dedicated SVM for CIFS on a FAS8200 2-node cluster using multiple disk types.

In this scenario, which action ensures that this SVM hosts volumes only on SATA drives?

Edit the SVM resource allocation.

Assign all the SATA drives to a CIFS SV

Move the SAS and SSD aggregates to a different node.

Create a FlashPool aggregate with SATA drives.

82. Click the Exhibit button.

You have a mission-critical SQL application that uses a single SMB 3.1.1 share to host its database. The storage node that is hosting the SMB share sql01_ca for the SQL database experiences a hardware failure and fails over to the surviving node.

Referring to the exhibit, what is the state of the SMB share for the SQL database during the failover? (Choose the best answer.)

The SMB share will be available, but all data is corrupted.

The SMB share will be unavailable until node failback.

The SMB share will be available, and all data is accessible.

The SMB share is unavailable due to its stateful nature.

83. What are two methods to improve system administration access control security on your ONTAP environment? (Choose two.)

Enable SAML Authentication using an Identity Provider that supports multi-factor authentication.

Enable two-factor authentication for SSH access

Enable encrypted cluster peering for peering relationships using the cluster modify command.

Enable Onboard Key Manager to encrypt volumes.

84. Which privilege is assigned to the vsadmin-backup role?

configuring SnapMirror relationships between clusters

managing Snapshot copies

managing volumes

configuring LIFs for cluster peering

85. You want to create a new storage pool of SSDs to provide a performance tier for FlashPool-enabled aggregates on node1 and node2.

You expect that the FabricPool aggregates on node1 will require more of the performance tier than the aggregates on node2.

Which action satisfies the requirement?

Use the storage disk reassign command to reassign disks from the SSD storage pool from node2 to node1.

Use the storage pool reassign command to reassign storage pool allocation units from node2 to node1.

Use the storage pool add command to add HDDs to the FabricPool aggregates on node1.

Use the storage pool modify command to change the parity of the RAID groups in the storage pool to RAID-4

86. You have a 2-node NetApp FAS500f system serving NAS and SAN protocols. The cluster is running NetApp ONTAP 9.8. You have a requirement to use SnapMirror to mirror your data to public cloud object storage.

In this scenario, which ONTAP native solution is supported?

Flash Pool

Cloud Backup Service

Cloud Compliance service

Cloud Sync

87. Which NetApp software do you use to confirm that the SAS cabling is correct?

Hardware Universe

Active IQ Config Advisor

Interoperability Matrix Tool

Active IQ Unifide manager

88. When you use the default SnapMirror policy during transfer of a data protection SnapMirror relationship, what is transferred?

the Snapshot copy that is created by the transfer process and any existing Snapshot copies

the Snapshot copy that is manually created and any existing Snapshot copies

the SnapMirror license

only the existing Snapshot copies

89. On which two types of ports would data LIFs be hosted? (Choose two.)

physical ports or interface groups that host VLANs

management e0M port

console RJ45 port

physical ports that are not part of interface groups

90. A storage administrator is troubleshooting CIFS share connection issues.

In this scenario, what would be three causes for these issues? (Choose three.)

The cluster time is not synchronized with the domain controller.

The NIS service is not running.

The machine account has been deleted in the Active Directory.

The machine password is not synchronized with the domain controller.

The number of allowable CIFS shares have been exceeded.

Page 10 of 12

91. You want to use external tools to monitor your ONTAP cluster’s performance metrics so that your operations team does not have to log in to the cluster.

Which three tools allow you to accomplish this task? (Choose three.)

OnCommand Insight

OnCommand Workflow Automation

Active IQ Unified Manager

ONTAP System Manager

Cloud Insights

92. An administrator forgot to update the cabling sheet for a core Cisco switch and cannot recall which ports were used by the NetApp FAS system.

Which command should the administrator run to obtain this information?

network port show

network device-discovery show

network interface show

network port broadcast-domain show

93. Which two features are supported on NetApp ONTAP? (Choose two.)

SnapMirror

FlexCache

Fibre Channel

Storage Pool

94. Which two interface group types enable the load balancing algorithm to be used? (Choose two.)

load balance mode

QoS mode

dynamic multimode

static multimode

95. Exhibit:

An export policy rule for a volume is set by using the command shown in the exhibit.

If clients with IP addresses 10.64.19.0 and 10.64.18.20 accessed the export, what is the outcome?

Neither client is given access.

Client 10.64.19.0 is given access but 10.64.18.20 is not given access.

Client 10.64.19.0 is not given access but 10.64.18.20 is given access.

Both clients are given access.

96. Exhibit.

You have an SVM-DR relationship as shown in the exhibit. You are given a new requirement to use SnapMirror Synchronous (SMS) for the data volumes In NFS-SVM-01.

In this scenario, which solution Is supported to enable SMS in ONTAP 9.8 software?

Set up new SM-S relationships from the AFF A220 to a new destination.

Set up new SM-S relationships from the FAS2720 to a new destination.

Set up NetApp Cloud Sync with a cloud broker in AWS to replicate to a new destination.

Modify the existing SVM-DR policy to use sync mode.

97. Exhibit:

You are troubleshooting a Linux host named host1 that sees a connection refused message when you execute the ssh [email protected] command.

Referring to the exhibit, what is the reason for this message?

There is no route to the host.

The firewall policy is blocking the host.

NTP is set up incorrectly.

DNS is not resolving the host name.

98. What is the minimum number of disks required to create a RAID-DP data aggregate?

99. You are planning an installation of a new stack of shelves to an HA pair and need to locate empty SAS ports...

In this scenario, which tool would you use to accomplish this task remotely?

ONTAP System Manager

Active IQ Web site

Hardware Universe

Interoperability Matrix Tool

100. Which security method would be used to authenticate targets and Initiators In an ISCSI environment?

NIS

LDAP

/etc/hosts

CHAP

Page 11 of 12

101. Exhibit:

Referring to the exhibit, what are two reasons why no initiators are displayed in the initiators' igroup screen? (Choose two.)

The server has not been powered up.

SLM has not been enabled.

Zoning on the switches has been done incorrectly.

ALUA has not been enabled on the NetApp controllers.

102. All SMB users are reporting that their network share performance Is slow on a new NetApp FAS500f HA pair. You determine that the users have converged network adapters (CNAs) with flow control enabled and no option to disable.

In this scenario, which two flow control settings are recommended on the NetApp ONTAP physical ports? (Choose two.)

Disable flow control end-to-end on data network ports.

Enable flow control end-to-end on cluster network ports.

Enable flow control end-to-end on data network ports.

Disable flowcontrol end-to-end on cluster network ports.

103. After creating several volumes, you notice that the hosting aggregates Immediately show adecrease In available space.

Which volume setting would prevent this outcome?

space SLO set to "thick"

space guarantee set to "none"

space SLO set to "semi-thick"

space guarantee set to "volume"

104. You are running out of space on an aggregate and decide to move a FlexVol volume to a different aggregate. You do not want to move the Snapshot copies with the volume.

Which two actions satisfy your requirement? (Choose two.)

Use the storage aggregate relocation command on the node.

Create a FlexClone volume.

Use the volume move command on the FlexCIone volume.

Use the volume rehost command on the FlexClone volume.

105. A customer installed an ONTAP cluster. The customer wants to provide data access to host computers and end users.

Which three tasks are required? (Choose three.)

Create a Quality of Service (QoS) policy.

Create an SV

Create a LI

Create an IPspace.

Create a volume.

106. What are two client specifications for an export rule? (Choose two.)

0.0.0.0/0

192.168.100.0/0

192.168.100.0/16

0.0.0.0/16

107. SnapMirror Business Continuity (SM-BC) relies on a component to trigger an automatic unplanned failover (AUFO).

In this scenario, what is this component?

ONTAP Deploy

Tiebreaker software

ONTAP Mediator

Cloud Manager

108. Click the Exhibit button.

A company has three servers that are using the iSCSI protocol to connect to a 2 node NetApp ONTAP cluster. The server administrator notices that half of the paths are down. When you check the ONTAP cluster, you notice that the servers are togging into only the first controller.

Referring to the exhibit, which two steps do you take to troubleshoot the issue? (Choose two.)

Verify that the UFs are up.

Verify that the ISCSI data protocol has been enabled on the ports.

Verify that each server has been rebooted.

Verify that the controller has not been taken over.

109. Which two components are required for committing data to a WORM volume? (Choose two.)

You must license SnapLock.

You must create a SnapLock volume.

You must create a SnapLock SV

You must create a SnapLock Aggregate.

110. When you create a FlexVol volume, which security style is applied by default?

the security style of the SVM root volume

the security style of the root volume of the cluster

NTFS

UNIX

Page 12 of 12

111. Click the Exhibit button.

A volume is only 25% full; however, the snapshot reserve is almost full.

Referring to the exhibit, what occurs after the volume's snapshot reserve is full?

User-created Snapshot copies are deleted, beginning with the oldest, until the snapshot reserve has 20% free space.

Scheduled Snapshot copies are deleted, beginning with the oldest, until the snapshot reserve has 20% free space.

Snapshot copies start consuming the volume's free space.

The creation of new Snapshot copies fails.

112. Exhibit:

cluster1::> volume create -vserver vsl -volume voll -aggregate aggr1 -encrypt true

Which statement regarding the command shown in the exhibit is true?

The volume will be created and protected on an aggregate using NetApp Storage Encryption (NSE) disks.

The volume will be created and protected using an external Key Management Server.

The volume will be created and protected for Snaplock Enterprise compliance.

The volume will be created and protected using NetApp Volume Encryption (NVE).

113. Exhibit.

You have a 2-node NetApp FAS2750 ONTAP cluster. You create a new 20-GB LUN In a new 100-GB volume and write 10 GB of data to the LUN. No storage efficiencies are enabled for the volume or aggregate.

Referring to the exhibit, which two statements are true? (Choose two.)

ONTAP reports that the volume Is using 10 GB of Its containing aggregate.

ONTAP reports the volume as 20% full.

ONTAP reports that the volume Is using 100 GB of its containing aggregate.

ONTAP reports the volume as 10% full.

114. Which NetApp product enables you to leverage legacy storage investments?

FlexClone

FlexGroup

Cloud Volumes ONTAP

FlexArray

Facebook Twitter LinkedIn Google + Email