Free HPE7-A01 Dumps - Aruba Certified Campus Access Professional Exam

Free HPE7-A01 Dumps – Aruba Certified Campus Access Professional Exam

Jonnie Karnath2023-08-15T07:53:21+00:00

The HPE7-A01 Aruba Certified Campus Access Professional Exam is designed for IT professionals who want to prove their skills and knowledge in designing, implementing, and managing Aruba WLANs. If you’re planning to take this exam, you’ll be happy to know that Certspots offers free HPE7-A01 dumps to help you prepare. These HPE7-A01 dumps contain real exam questions and answers, so you can practice and assess your knowledge before the actual exam. With Certspots’ free HPE7-A01 dumps, you can identify your weak areas and focus your study efforts to improve your chances of passing the exam. Don’t miss the opportunity to take advantage of these free resources to help you succeed in your Aruba Certified Campus Access Professional Exam. Get your free HPE7-A01 dumps from Certspots today and start preparing for your exam with confidence!

Page 1 of 3

1. What is enabled by LLDP-MED? (Select two.)

Voice VLANs can be automatically configured for VoIP phones

APs can request power as needed from PoE-enabled switch ports

iSCSl client devices can request to have flow control enabled

GVRP VLAN information can be used to dynamically add VLANs to a trunk

iSCSl client devices can set the required MTU setting for the port.

2. The administrator notices that wired guest users that have exceeded their bandwidth limit are not being disconnected Access Tracker in ClearPass indicates a disconnect CoA message is being sent to the AOS-CX switch.

An administrator has performed the following configuration

What is the most likely cause of this issue?

Change of Authorization has not been globally enabled on the switch

The SSL certificate for CPPM has not been added as a trust point on the switch

There is a mismatch between the RADIUS secret on the switch and CPP

There is a time difference between the switch and the ClearPass Policy Manager

3. Refer to the exhibit.

With Core-1. what is the default value for config-revision?

1-0

0. 0

4. What is the order of operations tor Key Management service for a wireless client roaming from AP1 to AP2?

5. A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several AP-515s and AP-575S. Cables running to theAPs are not labeled.

The VLANs are already preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests).

What is the correct configuration to ensure that APs will work properly?

A)

Option A

Option B

Option C

6. In an ArubaOS 10 architecture using an AP and a gateway, what happens when a client attempts to join the network and the WLAN is configured with OWE?

Authentication information is not exchanged

The Gateway will not respond.

No encryption is applied.

RADIUS protocol is utilized.

7. You are setting up a customer's 15 headless loT devices that do not support 802.1X..

What should you use?

Multiple Pre-Shared Keys (MPSK) Local

Clearpass with WPA3-PSK

Clearpass with WPA3-AES

Multiple Pre-Shared Keys (MPSK) with WPA3-AES

8. Your customer is having connectivity issues with a newly-deployed Microbranch group The access points in this group are online in Aruba Central, but no VPN tunnels are forming..

What is the most likely cause of this issue?

There is a time difference between the AP and the gateways The gateways should have NTP added

The SSL certificate on the gateway used to encrypt the connection has not been added to the APs trust list

There may be a firewall blocking GRE tunneling between the AP and the gateway

The gateway group is running in automatic cluster mode and should be in manual cluster mode

9. When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?

QSVI

MAC tables

UDLD

RPVST+

10. Refer to the exhibit.

A company has deployed 200 AP-635 access points. To but is not working as expected.

What would be the correct action to fix the issue?

Change the SSID to WPA3-Enhanced Open

Change the SSID to WPA3-Enterprise (CCM).

Change the SSID to WPA3-Personal

Change the SSID to WPA3-Enterpnse (CNSA).

Page 2 of 3

11. A customer is using a legacy application that communicates at layer-2. The customer would like to keep this application working to a remote site connected via layer-3 All legacy devices are connected to a dedicated Aruba CX 6200 switch at each site.

What technology on the Aruba CX 6200 could be used to meet this requirement?

Inclusive Multicast Ethernet Tag (IMET)

Ethernet over IP (EolP)

Generic Routing Encapsulation (GRE)

Static VXLAN

12. Refer to the image.

Your customer is complaining of weak Wi-Fi coverage in their office. They mention that the office on the other side of the hall has much better signal.

What is the likely cause of this issue7

The AP is a remote access point.

The AP is using a directional antenna.

The AP is an outdoor access point.

The AP is configured in Mesh mode

13. Review the exhibit.

You are troubleshooting an issue with a 10 102.39 0/24 subnet which is also VLAN 1000 used Tor wireless clients on a pair of Aruba CX 8360 switches The subnet SVI is configured on the 8360 pair, and the DHCP server is a Microsoft Windows Server 2022 Standard with an IP address of 10 200 1.100. The 10.102.250.0/24 subnet is used for switch management.

A large number of DHCP requests are failing You are observing sporadic DHCP behavior across clients

attached to the CX 6100 switch.

Which action may help fix the issue?

A)

Option A

Option B

Option C

Option D

14. A company deployed Dynamic Segmentation with their CX switches and Gateways After performing a security audit on their network, they discovered that the tunnels built between the CX switch and the Aruba Gateway are not encrypted. The company is concerned that bad actors could try to insert spoofed messages on the Gateway to disrupt communications or obtain information about the network.

Which action must the administrator perform to address this situation?

Enable Secure Mode Enhanced

Enable Enhanced security

Enable Enhanced PAPI security

Enable GRE security

15. A large retail client is looking to generate a rich set of contextual data based on the location information of wireless clients in their stores

Which standard uses Round Trip Time (RTT) and Fine Time Measurements (FTM) to calculate the distance a client is from an AP?

802.11ah

802.11mc

802.11be

802.11V

16. A customer is using Aruba Cloud Guest, but visitors keep complaining that the captive portal page keeps coming up after devices go to sleep Which solution should be enabled to deal with this issue?

MAC Caching under the splash page

MAC Caching under the user-role

Wireless Caching under the splash page

MAC Caching under the WLAN

17. List the WPA 4-Way Handshake functions in the correct order.

18. Which statements are true about VSX LAG? (Select two.)

The total number of configured links may not exceed 8 for the pair or 4 per switch

Outgoing traffic is switched to a port based on a hashing algorithm which may be either switch in the pair

LAG traffic is passed over VSX ISL links only while upgrading firmware on the switch pair

Outgoing traffic is preferentially switched to local members of the LA

Up to 255 VSX lags can be configured on all 83xx and 84xx model switches.

19. Which feature supported by SNMPv3 provides an advantage over SNMPv2c?

Transport mapping

Community strings

GetBulk

Encryption

20. Which statements regarding Aruba NAE agents are true? (Select two )

A single NAE script can be used by multiple NAE agents

NAE agents are active at all times

NAE agents will never consume more than 10% of switch processor resources

NAE scripts must be reviewed and signed by Aruba before being used

A single NAE agent can be used by multiple NAE scripts.

Page 3 of 3

21. Two AOS-CX switches are configured with VSX at the the Access-Aggregation layer where servers attach to them An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the VSX switches.

What is correct about access from the servers to the Core? (Select two.)

Server 1 can access the core layer via the keepalrve link

Server 2 can access the core layer via the keepalive link

Server 2 cannot access the core layer.

Server 1 can access the core layer via both uplinks

Server 1 and Server 2 can communicate with each other via the core layer

Server 1 can access the core layer on only one uplink

22. A network engineer recently identified that a wired device connected to a CX Switch is misbehaving on the network To address this issue, a new ClearPass policy has been put in place to prevent this device from connecting to the network again.

Which steps need to be implemented to allow ClearPass to perform a CoA and change the access for this wired device? (Select two.)

Confirm that NTP is configured on the switch and ClearPass

Configure dynamic authorization on the switch.

Bounce the switchport

Use Dynamic Segmentation.

Configure dynamic authorization on the switchport

23. A customer wants to provide wired security as close to the source as possible

The wired security must meet the following requirements:

-allow ping from the IT management VLAN to the user VLAN

-deny ping sourcing from the user VLAN to the IT management VLAN

The customer is using Aruba CX 6300s

What is the correct way to implement these requirements?

Apply an outbound ACL on the user VLAN allowing temp echo-reply traffic toward the IT management VLAN

Apply an inbound ACL on the user VLAN allowing icmp echo-reply traffic toward the IT management VLAN

Apply an inbound ACL on the user VLAN denying icmp echo traffic toward the IT management VLAN

Apply an outbound ACL on the user VLAN denying icmp echo traffic toward the IT management VLAN

24. You are configuring an SVI on an Aruba CX switch that needs to have the following characteristics:

* VLANID = 25

. IPv4 address 10 105 43 1 with mask 255 255 255.0

* IPv6 address fd00:5708::f02d:4df6 with a 64 bit prefix length

* member of VRF eng

* VRF eng and VLAN 25 have not yet been created

Which command lists will satisfy the requirements with the least number of commands?

A)