Aruba Certified Campus Access Associate HPE6-A85 Dumps Questions

Jonnie Karnath2023-07-18T07:41:09+00:00

Aruba Certified Campus Access Associate HPE6-A85 is an exam that tests your knowledge and skills in deploying AOS 8 single-site, on-premises, geographically dispersed networks, and cloud-based Aruba solutions. Passing this exam is a great way to demonstrate your expertise in Aruba networking technology. If you are planning to take the exam, it is highly recommended to study Certspots Aruba Certified Campus Access Associate HPE6-A85 dumps questions for the best preparation. Certspots offers a range of free online practice exams that you can use to test yourself and identify areas where you need to focus your study efforts. Their HPE6-A85 dumps questions are regularly updated to reflect the latest exam content, ensuring that you have the most up-to-date information at your disposal. With Certspots, you can be confident that you are getting the best possible preparation for the HPE6-A85 exam. Start studying today and give yourself the best chance of success on the HPE6-A85 exam!

Page 1 of 2

1. What is the recommended VSF topology? (Select two.)

Star

Daisy chain plus MAD

Full mesh

Full mesh plus MAD

Ring

2. A customer has just implemented user and device certificates via a company-wide Group Based Policy (GPO).

Which EAP method requires client certificates when authenticating to the network?

EAP-TTLS

EAP-TLS

EAP-TEAP

PEAP

3. Review the configuration below.

Why would you configure OSPF to use the IP address 10.1.200.1 as the router ID?

The IP address associated with the loopback interface is non-routable and prevents loops

The loopback interface state is dependent on the management interface state and reduces routing updates.

The IP address associated with the loopback interface is routable and prevents loops

The loopback interface state Is independent of any physical interface and reduces routing updates.

4. What can be done to dynamically set the PoE Priority on a switch port when deploying IP cameras APs. and other PoE devices?

Enable Quick PoE on the switch modules

Enable profiling for device provisioning

Configure PoE power management to Class-based Mode

Configure PoE power management to Dynamic Mode

5. Match the switching technology with the appropriate use case.

6. Make sure the interfaces are all ON.

Which configuration script will achieve the task?

Edge1# conf t vlan 20 name Mgmt interface vlan 20 ip address 10.1.1.10/24 no shut interface lag 1 shut vlan access 20 lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut

Edgel# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1.1 10/24 no shut interface 1/1/51.1/1/52 shut vlan trunk native 20 vlan trunk allowed all lag 1 lacp mode active interface 1/1/51.1/1/52 no shut

Edgel# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1 1 10/24 no shut interface lag 1 shut vlan trunk native 20 vlan trunk allowed all lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut interface 1/1/51.1/1/52 no shut

conf t vlan 20 name Mgmt ip address 10 1 1.10/24 no shut interface lag 1 shut vlan trunk native 1 vlan trunk allowed all lacp mode active int 1/1/51.1/1/52 shut no routing interface lag 1 no shut interface 1/1/51.1/1/52 no shut

7. Match the feature to the Aruba OS version (Matches may be used more than once.)

8. Match the phase of message processing with the Open Systems interconnection (OSl) layer.

9. You put in a few show commands on switches EDGE1 and CORE1 to attempt to gather information to troubleshoot the issue Use the show command output images to determine the reason for the EDGE1 uplink being down

The physical interfaces are not members of the correct LA

Spanning-Tree block state is preventing the Core uplink from having connectivity to the edge

The Core is connected to the incorrect physical interlaces

LACP is not configured on the Core uplink

10. Which feature can network administrators use to centralized RF planning and optimization service when using an Aruba mobility master architecture?

Airwave

Client Match

AirMatch

Client Wave

Page 2 of 2

11. What are the main characteristics of the 6 GHz band?

Less RF signal is absorb by objects in a 6 GHz WLA

In North America, the 6 GHz band offers more 80 MHz channels than there are 40 MHz channels in the 5 GHz band.

The 6 GHz band is fully backward compatible with the existing bands.

Low Power Devices are allowed for indoor and outdoor usage.

12. Which commands are used to set a default route to 10.4.5.1 on an Aruba CX switch when ln-band management using an SVl is being used?

iP default-gateway 10.4.5.1

ip route 0 0 0.070 10.4 5.1 vrf mgmt

ip route 0.0 0 0/0 10.4.5.1

default-gateway 10.4.5.1

13. List the WPA 4-Way Handshake functions in the correct order.

14. Describe the purpose of the administrative distance

Routes teamed via external BGP have a higher administrative distance than routes learned via OSPF

The administrative distance is used as a trust rating tor route entries

The administrative distance for a static route is 10

The higher administrative distance is preferred

15. What does the status of "ALFOE" mean when checking LACP with "show lacp interfaces'"?

The interface on the local switch is configured as static-LAG

LACP is not configured on the peer side

LACP is in a synchronizing process

LACP is working fine with no problems

16. When would you bond multiple 20MHz wide 802.11 channels?

To decrease the Signal to Noise Ratio (SNR)

To increase throughput between the client and AP

To provision highly available AP groups

To utilize high gain omni-directional antennas

17. A network technician is troubleshooting one new AP at a branch office that will not receive Its configuration from Aruba Central. The other APs at the branch are working as expected. The output of the 'show ap debug cloud-server command' shows that the "cloud conflg received" Is FALSE.

After confirming the new AP has internet access, what would you check next?

Disable and enable activate to trigger provisioning refresh

Verify the AP can ping the device on arubanetworks.com

Verify the AP has a license assigned

Disable and enable Aruba Central to trigger configuration refresh

18. Match each AAA service with its correct definition (Matches may be used more than once or not at all)

19. What are two advantages of a UXl? (Select two.)

A UXl can be used without any internet connection

A UXl helps to calculate the best WiFi channels in a remote location

A UXl behaves like a client/user

A UXl measures the Wi-Fi coverage of all APs in the given location.

A UXl can check different applications, such as HTTP VOIP or Office 365.

Facebook Twitter LinkedIn Google + Email