Cloud, Specialist (JNCIS-Cloud) JN0-413 Dumps Questions

Jonnie Karnath2023-10-23T07:10:01+00:00

To ensure your success in the JN0-413 Cloud, Specialist (JNCIS-Cloud) exam, it is highly recommended that you take advantage of the comprehensive resources provided by Certspots. By studying the latest Cloud, Specialist (JNCIS-Cloud) JN0-413 Dumps Questions, you will acquire the knowledge and skills necessary to excel in your test. Furthermore, Certspots offers free JN0-413 practice exams that allow you to assess your understanding and identify areas for improvement. By utilizing these valuable resources, you can confidently approach your exam and increase your chances of passing with flying colors.

Page 1 of 2

1. What are two advantages of SDN? (Choose two.)

Centralized management

Decentralized management

Programmability

Static networking

2. Which protocol is used to exchange routes between the Contrail controller and compute nodes?

BGP

Sandesh

NETCONF

XMPP

3. Refer to the exhibit.

After provisioning a group of 20 VMs, the client reports that one of the VMs has unidirectional traffic problem.

Referring to the exhibit, what is causing the problem?

The VM did not fully initialize after booting.

The VM is not provisioned with the correct flavor.

The vRouter has a policy preventing the traffic.

The vRouter does not have an appropriate route.

4. Creating a Contrail service chain requires the configuration of which three elements? (Choose three).

Service Policy

Service template

Service object

Service network

Service instance

5. Refer to the exhibit.

Referring to the exhibit, when the user attempts the API request, which HTTP return code is generated by OpenStack?

HTTP 503 (Service Unavailable)

HTTP 400 (Bad Request)

HTTP 404 (Not Found)

HTTP 401 (Unauthorized)

6. You are using OpenStack as the orchestrator for your data center. You need to instantiate several instances of a webserver. There is a requirement that each webserver VM must have six VCPUs and 32 GB of RAM.

Where in OpenStack’s Web user interface would you set up these resources?

Project>Compute>Instances

Orchestration>Stacks

Project>Compute>Images

Admin>System>Flavors

7. You are implementing an OpenStack environment and need to install the Glance service on the control node.

Which two actions must take place to successfully complete this action? (Choose two.)

Create the API endpoints in Keystone.

Create a new availability zone for Glance.

Create the Glance service credentials.

Create local storage capacity for Glance images.

8. The Sandesh protocol enables which infrastructure model?

Centralized

Unified

Secure

Diversified

9. Which two statements are true regarding the Network Function Virtualization (NFS) framework? (Choose two.)

The NFS framework requires an orchestration platform.

The NFS framework relies on a commodity hardware.

The NFS framework relies on custom built ASICs.

The NFS framework requires directly attached storage components.

10. Refer to the exhibit.

You are trying to connect virtual machine A to virtual machine B. Virtual machine A belongs to the security group WebServers. Virtual machine B belongs to the default security group.

Referring to the exhibit, which two actions would you perform on the default security group to allow access to virtual machine A? (Choose two.)

Add an egress rule to the default security group to allow VM A’s IP address.

Add an ingress rule to the default security group to allow the WebServers security group.

Add an egress rule to the default security group to allow the WebServers security group.

Add an ingress rule to the default security group to allow VM A’s IP address.

Page 2 of 2

11. What does the Contrail Analytics service do with flows that are greater than or equal to the sampling threshold?

The flow sample is not exported.

A modified flow sample is exported according to the probability of bytes during the interval divided by the sampling threshold.

The flow sample is exported.

A modified flow sample is exported only after normalizing the byte and packet count during the interval.

12. You want to deploy an application to the cloud. You need to control the amount of RAM, storage, CPU cores, networking ports, and IP addresses.

Which type of cloud service should you choose in this scenario?

DBaaS

PaaS

IaaS

SaaS

13. You are required to deploy a network service in between two customer sites without modifying IP addresses. You are using Contrail to manage your network services.

How would you accomplish this task?

Deploy the service with only a left interface.

Deploy the service as type un-neterwork.

Deploy the service as type transparent.

Deploy the service with only a right interface.

14. Refer to the exhibit.

$ neutron net-show secret_network

You have created a new network in a Juniper OpenStack environment and now you want to share the object with a project that has an ID of e28769db97d9449da658bc6931fc683.

Which command will allow the object to be shared?

neutron rbac- create C target-tenant e28769db97d9449da658bc6931fc683―action access_as_shared--type network

neutron rbac- create C target-tenant e28769db97d9449da658bc6931fc683―action access_as_shared-- type network secret_network

neutron rbac- create C target-tenant e28769db97d9449da658bc6931fc683―action access_as_shared-- type network 75ebefae574682bca2fede6f4d8c6f

neutron rbac- create C target-tenant e28769db97d9449da658bc6931fc683―action access_as_shared-- type network*

15. Refer to the exhibit.

Referring to the exhibit, you notice that the compute-4 and compute-5 nodes are not in an operational state.

What caused this problem?

The compute nodes’ BGP peering sessions are down.

The compute nodes do not have the Glance service running.

The compute nodes do not have the vRouter agent running.

The compute nodes’ XMPP peering sessions are down.

16. Refer to the exhibit.

A Contrail service instance is created in a scale-out mode with three instances (Sl-1, Sl-2, and Sl-3) between the left virtual network and the right virtual network.

Referring to the exhibit, which two statements are correct in this scenario?

(Choose two.)

Every packet between the virtual networks is forwarded to each of the three service instances.

A Contrail policy can be used to block traffic initiated from the right virtual network to the left virtual network.

A Contrail policy has options to configure load sharing between the three service instances.

The traffic between the virtual networks is load sharing using ECM

17. When using Contrail Analytics for underlay overlay mapping, which statement is true?

SNMP must be enabled on each physical device.

IPFIX and sFLOW must be enabled on each physical device.

SNMP is not required if LLDP in enabled on each physical device.

JTI must be enabled on each physical device.

18. Refer to the exhibit.

Referring to the exhibit, what does the IP address 10.1.1.2 refer to in the api_server.conf file in Contrail?

The physical server IP address

The OpenStack controller IP address

The Server Web UI IP address

The Contrail IP address

19. What are two features of software containers? (Choose two.)

They provide programming language backward compatibility.

They provide greater software modularity.

They have complete operating system security.

They have isolated application thread processing.

20. You are required to implement a Contrail service that will automatically increase network resources for that service when under high traffic loads, and reduce network resources for that service under low traffic loads.

Which configuration steps will accomplish this task?

Configure Heat to monitor the CPU threshold of services VMs, and configure a Heat auto-scaling policy to adjust the VM resources allocated to the service.

Configure Ceilometer to monitor the CPU threshold of services VMs, and configure a Ceilometer auto-scaling policy to adjust the VM resources allocated to the service.

Configure Heat to monitor the CPU threshold of services VMs, and configure a Ceilometer auto-scaling policy to adjust the VM resources based on alarms generated by Heat.

Configure Ceilometer to monitor the CPU threshold of services VMs, and configure a Heat auto-scaling policy to adjust VM resources based on the alarms generated by Ceilometer

By Jonnie Karnath Juniper Free Dumps Cloud, JN0-413, JN0-413 Dumps Questions, Specialist (JNCIS-Cloud) 0 Comments

Facebook Twitter LinkedIn Google + Email

Cloud, Specialist (JNCIS-Cloud) JN0-413 Dumps Questions

Cloud, Specialist (JNCIS-Cloud) JN0-413 Dumps Questions

Author

LEAVE A COMMENT Cancel reply

Related Posts