NCA-6.5 Nutanix Exam Questions and Free Practice Test

Jonnie Karnath2023-04-22T08:47:11+00:00

If you’re looking to pass the Nutanix NCA-6.5 exam, Certspot NCA-6.5 Nutanix exam questions and free practice test are an excellent choice. These NCA-6.5 questions and answers are designed to help you prepare for the exam by providing you with up-to-date and accurate information on the exam topics. One of the best things about Certspot NCA-6.5 Nutanix exam questions and free practice test is that it’s designed to be user-friendly and easy to understand. Whether you’re a beginner or an experienced professional, their preparation material will help you gain a better understanding of the subject matter and allow you to test your knowledge before the actual exam.

Page 1 of 3

1. Which type of network supports automatically assigning IP addresses to VMs?

Floating IP Network

Management traffic network

Virtual Network with IPAM

Virtual Private Cloud Networks

2. Which Nutanix storage service can store Petabytes of unstructured data and supports S3 APIs?

DSF

Files

Volumes

Objects

3. Refer to the exhibit.

In which VM creation stage will the administrator see this dialog?

Upgrading Nutanix Guest Tools

During OS installation

During image sysprep

When powering on a UEFI VM

4. Which option is available for an administrator to upload a remote disk file to Image Configuration?

HTTP

FTP

SCP

SFTP

5. Which two advanced features requires you to install Nutanix Guest Tools (NGT)? (Choose two.)

Disaster Recovery of a VM between AHV and ESXi Hypervisors

Live Migration of a VM between AHV & other Hypervisors

File recovery from a third-party backup

Self-service file-level recovery from VM snapshots

6. Which Task is Required to initiate a live migration of VMs between two cluster?

Replicate VM Recovery Point

Promote Metro Availability Protection Domain

Press Migrate Button on the Protection Domain

Perform a Leap Planned Failover

7. An administrator has received the following critical alert:

Node 192.168.148.172 is marked to be detached from metadata. The administrator has opened a case with Nutanix and the support engineer has requested more information about the error.

Which two actions should the administrator take in the Health Check dashboard to collect the requested information? (Choose two.)

Create an Entity chart

Open a remote support tunnel.

Run the Log Collector

Run the Nutanix Cluster Check

8. An administrator needs to expand a Nutanix cluster that is tagging the network traffic at the CVM and AHV level. However, the administrator doesn't remember the configured VLAN ID.

Which command can the administrator run to find the correct VLAN ID from the CVM?

ifconfig

manage-ovs

acli

ovs-vscl

9. Nutanix Support Asked an administrator to provide AHV logs to help solve a support request .Which task should be performed to provide log files to the support team?

Run NCC Check from the command line

Upload log files from /home/nutanix/data/logs folder

collect logs from the health Page

Enable Pulse to include additional support information

10. Which product or feature is most suitable for deploying a Microsoft SQL cluster in a Nutanix environment?

Volumes

Objects

NFS shares

Files

Page 2 of 3

11. Which feature or configuration is best for securing network traffic between the management and storage replication environments?

Use of Firewall Rules

Network Segmentation

VM Anti-Affinity Rules

Different Storage Containers

12. An administrator manages a memory-sensitive application that consists of multiple VMs. The administrator needs to understand if workloads, historically, have been evenly distributed across these VMs.

What should the administrator do?

Create an Alert Policy with VM as entity type and memory usage as a metric.

Run cluster efficiency summary report selecting all the VMs that constitute the applications.

Add Memory usage chart to Analysis dashboard for each required V

Filter VMs list by using Memory Usage.

13. An administrator has defined a security policy that needs to be applied to dozens of VMs.

What is the most efficient way the administrator can perform this?

Within the policy, select all the VMs it should be applied to.

Apply a category to the VMs. and associate the category with the policy.

Apply the same label to all the VMs, then bind the policy to the label.

Use a script to apply the policy to the defined VMs.

14. A company's security team has requested that all IT resources be hardened.

What should an administrator do to increase the security of the Nutanix environment?

Enable Cluster Lockdown

Enable Prism Central KMS

Enable Flow

Enable STIG

15. Refer to the exhibit.

An administrator notices that the Data Resiliency Statue of some components has been reduced to 0. making it impossible to support a node failure in the cluster.

What type of failure is most likely the cause of this issue?

Block

Disk

CVM

Nods

16. What is required to successfully live migrate a VM Between two AHV clusters?

Stretch L2 networks across the primary and recovery sites

Configure a Protection domain with synchronous replication

Install and Configure the witness VM on a third Site.

Both clusters must be managed by the same prism central

17. An Administrator has created a Volume Group for a specific VM on an AHV Cluster.

What is the next step required to user vDisk in the VM?

Attach the Volume Group to the VM

Configure CHAP Authentication

Reboot the VM

Bring the disk Online

18. In an AHV five-node cluster, an SSD fails within a node that has two SSDs and four HDDs installed.

What will happen to the cluster environment?

Host goes down and VMs will be powered on elsewhere.

Cluster goes in read-only mode.

VMs will be live migrated to other hosts until metadata rebuild is finished.

CVM on the impacted node reboots.

19. Which feature enables Image Placement Policies to be mapped to target clusters?

YAML

Labels

JSON

Categories

20. An administrator needs to do a manual VM in-place restore of a mission-critical VM.

Which Prism Central option should the administrator use to satisfy this task?

Snapshot

Clone

Backup

Recovery Point

Page 3 of 3

21. Within a Nutanix cluster an administrator is getting frequent failure alerts of the Cassandra and Stargate services for one of the nodes.

What action will be taken by the cluster?

Put host in Maintenance Mode

Redirect I/O path to another CVM

Remove the host from cluster

Reboot Guest VMs to another hosts

22. A New Project is Being rolled out to an AHV Cluter being monitored by prism Central , The Application team indicated that the application managed by the project is very memory intensive . The administrator wants to be notified about any memory constraints should they occour.

How would an administrator most effectively achieve this task?

Create a new metric chart for the cluster and analyse hypervisor Memory Usage

Search for the VM , then in the details page , go to metrics an select CPU usage.

Create a Report to tracking the memory Usage

Create a new alert policy for the memory Usage and set to critical after 80%.

23. Which directory should the LCM Framework Bundle be extracted to on a dark site web server in order to update the LCM Framework?

release

upgrade

software

install

24. Refer to the exhibit.

An administrator needs to upgrade a VM to 10 virtual processors.

Which action should the administrator take to complete this task?

Power-off the VM and add one vCPU

Update the VM adding two vCPUs

Update the VM adding two cores

Power-off the VM and add one core

25. Which Nutanix storage efficiency feature is suitable for nearly every workload?

Erasure Coding

Deduplication

Compression

Thick Provisioning

26. What is the biggest benefit of the Redfish Protocol and LCM?

HBA and NIC card update twice as quickly

AOS and AHV update twice as quickly

BMC and BIOS update twice as quickly

SSD and HDD update twice as quickly

27. Which Nutanix Product Provide S3-Compatible Storage ?

Volumes

Files

Objects

Mine

28. From Prism Central, how can an administrator access a cluster?

Use the VM Summary view.

Use the cluster quick access from the main dashboard widget.

Use the cluster quick access from the Settings page.

Use the Cluster Summary view.

29. An administrator has been tasked with delivering a report on all nutanix Field Advisors (FAs) Affecting each of the clusters.

What is the most efficient way to collect this data?

Request an environmental audit from the Nutanix Support

Use Prism to run NCC and Check for information on FAs

Review the discoveries information on the support Portal

Review Field Advisories published on the Support Portal

30. On which entity is Replication Factor configured?

Host

Oplog

Volume

Container

Facebook Twitter LinkedIn Google + Email